How to install the Dyson DC07 Cyclone Bin Flap Catch: You need to replace the bin flap catch (clip) on your DC07 when the flap no longer closes and stays closed. If you open the flap and look for the little black spring-loaded titling clip, it has a hook on the bottom of it that breaks occasionally. This is… Read More »
Dyson DC07 Motor Swap/Change
Remember to make sure your Dyson DC07 is unplugged from the mains before starting this job.
Replacing the motor is probably the most technical, and certainly the hardest repair to the Dyson DC07, and should only be undertaken by competent people who feel confident enough with electrical appliances to do it. This is not an amateur job and if you are not confident performing a motor swap to your Dyson DC07, please take it to a vacuum cleaner repair shop.
Before you start, here is what you will need:
*A new motor. You can get a top quality one for £35 including fast UK delivery here: >>Dyson DC07 Motor<< *Various flat blade screwdrivers (you probably have a selection of those anyway). *A Dyson Star T15 Torx screwdriver (buy a good quality one >>HERE<<). *Pliers (or maybe grips). *A big cup of tea, the wife out of the house, and an hour or two to kill. Likely Symptoms of a Failed Dyson DC07 Motor: *A noticeable smell of burning or a very strong acrid smell when the Dyson is running. *The motor may sound noisy, laboured or be varying in speed when running. *The motor may make a strange popping or bubbling type of noise. *Smoke or sparks from motor housing area. *There can be a high pitched noise from the motor, which may suggest that the motor bearings are worn out. DC07 Model Variations. This video below was made using a base model DC07 without the brush control knob (clutch). There are some differences to the sole plate and brush-roll areas on machines fitted with a clutch (All Floors models). However, the core elements of the machine are almost the same. The replacement of the Dyson DC07 motors are somewhat similar between all variants, and shouldn't create too much of a challenge to those with a technical inclination. Click the title link to the main article to watch the video.
Is your Dyson DC07 cutting out? Let it cool down and it will run again maybe. Sound familiar?
Is suction not as good as it was? It’s all generally working but suction has declined over time?
Did you ever change the filter?
“There’s a filter?” you ask. “Where is it?”
Not only is there a filter, but it is a washable filter. You can wash it a few times before it will need replacing (unless you have neglected it beyond the point of no return, in that event, you buy a new Dyson DC07 filter). So here is what you do: Take a look down the side of the machine, see that little coloured button?
So your brush roll (sometimes called a brush bar or a beater bar) wont turn or spin round on your Dyson DC04, Dyson DC07 or Dyson DC14?
I am going to cover the DC04, DC07 and DC14 models altogether here as the following advice is applicable for all three as they have very similar bottom end mechanicals.
First you should establish if your machine is a model with a clutch or without a clutch. If your machine is a model with a clutch, it will typically be designated as an “all floors”, a “multi floor”, an “allergy”, an “animal” or an “absolute”. If your Dyson has a clutch fitted, it will have a knob on the bottom body on the left hand side (looking from the front). It looks like this: (picture on main topic)
The clutch (if fitted), is designed to stop your machine from breaking the belts. If your machine has a clutch, the reason the brush bar isn’t spinning is unlikely to be a snapped belt. The clutch allows your brush roll to be turned off (for certain types of hard floors, etc.). First you should check if your brush bar is turned on. Try to turn the knob one click clockwise to the “auto” position.
If it is in the “auto” position already, now recline the machine by bending the wand handle back whilst holding your foot in the front corner recess of the body when the machine is running (in cleaning position). Did you know that on clutched models, the brush bar is not designed to turn until the machine is reclined into the cleaning position? Many people don’t. Many people think if the brush bar isn’t spinning when the Dyson is upright, that there is something wrong with it. There isn’t! Check to see if the brush bar spins when the machine is reclined in the cleaning position! If after turning the clutch to “auto” the machine brush bar is spinning when the machine is reclined, the problem is solved.
If you have a Dyson without a clutch, the brush roll should spin at all times; no matter if the machine is reclined or stood upright. If your machine doesn’t have a clutch, and the brush bar is not spinning, check the drive belt, it has probably snapped and wants replacing.
“My Dyson DC07 wont stand up” is the thing many people ask about on Dyson support forums. If your Dyson DC07 has this symptom, it likely isn’t picking up too well either. It may well be dropping some of the debris on the floor as well.
It was OK yesterday wasn’t it? What happened? You were using it, then it wouldn’t stand up.
Its actually quite a simple thing to fix that anyone can do at home. You don’t need any tools, you don’t need any expertise.
Our friends at Nelson Vacuums in Australia have made a short video on the subject that tells you everything you need to know. You will laugh at how much of a simple fix this is. Click the triangle “play” emblem on the video below.
Looking for an original Dyson instruction and operating manual for your Dyson DC07? You have come to the right place.
When you buy a used or a reconditioned Dyson, unless you have acquired it from a meticulous old lady who had it from new, you are unlikely to have got the original user manual.
Many people are confused with Dysons when it comes to using the back hose, using the tools, taking the wand off, emptying the vacuum cleaner, and simple maintenance of the filters. However, these things are not very hard if you know how. To know how, you need an original manufacturers user manual.
Dyson UK will happily sell you one for two or three pounds, but you are an internet surfer; you want one free don’t you? C’mon, admit it! You know it’s true.
OK, we’ll put you out of your misery. Click the link below to go through to the Dyson Forums where there are links to download all the Dyson user/operating/instruction manuals in PDF format. Completely free of charge.
Here is the link: Free Dyson Instruction Operating User Manuals