Dyson Medic

If you are looking to replace the power cord on a Dyson DC18, DC25, DC27, DC33, DC40, DC41, DC55, DC75, UP22 or the UP24 then read this before you buy something cheap and nasty from Amazon or eBay.

If you want a cable for a DC04, DC14 or a DC24, read instead >this article< on Dyson Medic.

Buying a replacement Dyson flex (or cable, lead, wire or cord if you prefer) is often a bit of a minefield.

Early Dyson models used to use a pale grey 0.75 mm flex. Often these used to fail where they entered the machine because they weren’t heavy-duty enough.

Later Dyson models used a thicker dark grey 1 mm flex which is considerably more durable.

The terminals on the end of the flexes varied across many Dyson models, and many of the later Dysons had varying different lengths of flexes fitted to them.

This has always created a little bit of a headache for those in the aftermarket and Dyson repairers. Because, for example, if you use a cable designed to fit a DC25 it often won’t wrap correctly on a machine such as the DC41.

Original Dyson cables are rather expensive, so naturally many people seek a good aftermarket replacement.

However, the problem with this is that most of the aftermarket tends to source Chinese products as cheap as they possibly can to meet the lowest retail price point they can.

But not everyone wants Lidl and Aldi do they? Some people prefer Waitrose or Marks and Spencer, right?

Most aftermarket flexes are 0.75 mm finished in a cheap-looking pale grey and shorter than you’d prefer. When fitted to a late model Dyson, these tend to look as cheap and nasty as they are. Many have the wrong spades on the end, badly crimped ones or no spades at all.

Its often hard to tell the difference between colour shades, good quality and a bad quality cable when looking at online listings, and by the time it prematurely fails, the window for return will have long passed anyway.

Dyson has always fitted nice little cable tidy clips to their original cables and most of the aftermarket don’t bother to supply these on their cables. Why? Because it adds a few pence to the production cost.

You can swap the cable clip over from your old one, but they are often fiddly and sometimes break.

Imagine if you could buy a good quality 1.00 mm replacement aftermarket Dyson cable? Imagine if it was in the correct dark grey, with the correct terminals on the end and a nice little cable tidy clip already fitted? It may even come in a cardboard box so that isn’t yet more plastic to kill the marine life in our oceans.

And now somebody has – here it is:

Totally plug and play and pretty much indiscernible from the original. Apart from being longer than most at over 10m.

With the correct spades for late model Dysons.

With a nice rubbery cable tidy clip already there.

This is a 1 mm, two core, longer than OEM specification, dark grey compatible flex that fits these Dyson models.

• • • Dyson DC18
    • Dyson DC25
    • Dyson DC27
    • Dyson DC33
    • Dyson DC40
    • Dyson DC41
    • Dyson DC55
    • Dyson DC75
    • Dyson UP22 Light Ball
    • Dyson UP24 Ball Animal 2

Cross reference with these part numbers: 920913-07, ES1557062, ES1117629, ES1085566, ES1640070, ES1117631, 923427-01, 911399-01, 914269-16, 915736-07.

You can buy it directly from Manchester Vacs here: Late Model Dyson Power Cord (Flex)

If you prefer eBay, you can get it here: Genuine Specification Dyson Replacement Flex Cable Cord Wire Lead

If you prefer Amazon, you can get it here: Replacement for Dyson Flex Cord Lead for DC18 DC25 DC27 DC33 DC40 DC41 DC55 DC75 UP22 UP24 – Cable Wire

If you are not in the UK (but are somewhere they use UK plugs like Hong Kong, Ireland, Cyprus, Malta, Malaysia, Singapore or Gibraltar) you will find it preferable to use the eBay listing linked above as that will give you full tracked delivery to most other countries.

If you are in the trade and want to buy cheaper in 10s, you can do so >>here<<.